1, LG series, SKY patented screw host Patented rotor profile, high efficiency,
heavy-duty design, SKY bearing, direct
drive, energy-saving principle, innovative design.
2, Dedicated engine with strong power equipped with heavy-duty specialized diesel
engines such as Yuchai and Cummins,
achieving the good combustion state throughout the entire range of engine operation, the
product has higher reliability,
stronger power, and better fuel economy.
3, Multi air filtration system:Effectively preventing the impact of harsh dust
environments on engines The precision
filter layer of the main air filter removes residual dust, ensuring that the machine The
device is not worn out; The
safety filter can allow the machine to operate without stopping the machine Filter
maintenance to ensure safe operation
of the machine.
4, Efficient cooling system: The design of independent oil, water, and air coolers
combined with large-diameter fans
adapts to harsh cold and hot climates.
5, Triple oil and gas separation system: Reduce the impact of excessive or insufficient
oil injection into the separator
on the oil content of compressed air, and always maintain the oil content of compressed
air below 3ppm. Clean compressed
air is beneficial for the safe operation of the equipment.
6, Low temperature starting system (optional): The water pump of the fuel heater draws
the coolant from the engine body
to the heat exchanger, and the oil pump draws the fuel from the mailbox to the burner
and burns it. Through the
continuous circulation of heat, the temperature of the coolant and the lubricating oil
of the whole machine continuously
increases, ensuring the starting performance of the diesel engine in harsh cold and
high-altitude environments.
7, Remote start stop, monitoring, and positioning system (optional)
Please visit this page to read the Operating instructions Page First
Please visit this page to read the Operating instructions Page Second
| Model | Working Pressure (mpa) |
Air Capacity (m3/min) |
Engine Power(HP) | Air Outlet Connector |
Weight(kg) | Dimension(LxWxH mm) |
|---|---|---|---|---|---|---|
| LGCY-11/18T (two wheels) | 1.8 | 11 | Yuchai 160 HP (4 cylinder) | G1 1/2x1, G3/4x1 | 2100 | 3400x2000x1930 |
| LGCY-15/18-17/12T | 1.8 to 1.2 | 15 to 17 | Yuchai 190 HP (6 cylinder) | G2x1, G3/4x1 | 2200 | 3000x1520x2300 |
| LGCY-17/18-18/15T | 1.8 to 1.5 | 17 to 18 | Yuchai 220 HP | G2x1, G3/4x1 | 2500 | 3000x1520x2300 |
| LGCY-17/18-18/15TK | 1.8 to 1.5 | 17-18 | Cummins 210 HP | G2x1, G3/4x1 | 2500 | 3000x1520x2300 |
| LGCY-19/21-21/18 | 2.1 to 1.8 | 19 to 21 | Yuchai 260 HP | G2x1, G3/4x1 | 3600 | 3300x1700x2350 |
| LGCY-19/21-21/18K | 2.1 to 1.8 | 19 to 21 | Cummins 260 HP | G2x1, G3/4x1 | 3600 | 3300x1700x2420 |
| LGCY-21/21-23/18 | 2.1 to 1.8 | 21 to 23 | Yuchai 310 HP | G2x1, G3/4x1 | 3900 | 3300x1800x2300 |
| LGCY-23/23-25/18 | 2.3 to 1.8 | 23 to 25 | Yuchai 340 HP | G2x1, G3/4x1 | 4500 | 4080x1950x2687 |
| LGCY-23/23-25/18K | 2.3 to 1.8 | 23 to 25 | Cummins 360 HP | G2x1, G3/4x1 | 4850 | 4150x1950x2850 |
| LGCY-27/25-29/18 | 2.5 to 1.8 | 27 to 29 | Yuchai 400 HP | G2x1, G3/4x1 | 4500 | 4080x1950x2687 |
| LGCY-25/23-27/18K | 2.3 to 1.8 | 25 to 27 | Cummins 360 HP | G2x1, G3/4x1 | 4850 | 4150x1950x2850 |
| LGCY-26/25K | 2.5 | 33 | Cummins 550 HP | G2x1, G3/4x1 | 6800 | 4700x2160x2650 |
| LGCY-26/25 | 2.5 | 26 | Cummins QSZ13-C550-30 | G2x1, G3/4x1 | 6800 | 4700x2160x2650 |
| LGCY-33/25 | 2.5 | 33 | Yuchai 560 HP | G2x1, G3/4x1 | 6800 | 4700x2160x2650 |
| LGCY-33/25K | 2.5 | 33 | Cummins 550 HP | G2x1, G3/4x1 | 6800 | 4700x2160x2650 |
| LGCY-39/25 | 2.5 | 39 | Chongqing Cummins 700 HP | G2x1, G3/4x1 | 7200 | 4850x2160x2661 |
| LGCY-39/25A | 2.5 | 39 | Catepillar 700 | G2x2 | 7200 | 5000x2200x2850 |
| LGCY-33/35 | 3.5 | 33 | Chongqing Cummins 700 HP | G2x1, G3/4x1 | 7200 | 4850x2160x2661 |
| LGCY-33/35A | 3.5 | 33 | Catepillar C18-650 HP | G2x2 | 7200 | 5000x2200x2850 |
| LGCY-43/25-37/35Y | 2.5 to 3.5 | 37 to 43 | Volvo 760 HP | G2x1, G3/4x1 | 9000 | 5207x2200x2720 |
| LGCY-30/8TK | 0.8 | 30 | Cummins 260 HP | G2 1/2x1, G3/4x1 | 3200 | 3600x1800x2480 |
| LGCY-25/10TK | 1 | 25 | Cummins 260 HP | G2 1/2x1, G3/4x1 | 3200 | 3600x1800x2480 |
| LGCY-21/13TK | 1.3 | 21 | Cummins 260 HP | G2 1/2x1, G3/4x1 | 3200 | 3600x1800x2480 |